FRM220-1000ES1

The FRM220-1000E(s)-1 is a copper to fibre Gigabit Ethernet solution designed to make conversion between 10/100/1000Base-TX and 1000Base-SX/LX with SC or SFP LC connector. With SNMP and Web-based management in the FRM220, the Network administrator can monitor, configure and control the activity of each card in the chassis. This converter also supports features such as ingress/egress bandwidth control, auto or forced mode setting for copper Ethernet as well as auto laser shutdown.

Features:

• 10/100/1000Base-T to 1000Base-SX/LX SFP Managed card
• Auto-negotiation or forced mode
• Auto MDI/MDIX
• Forward 1632 bytes (max.) packets
• Support Bandwidth Control (70k ~ 250Mbps)
• Supports Flow control (Pause)
• Support Link fault pass through (LFP) function
• Supports remote CPE power fail detect (dying gasp)
• Auto Laser Shutdown (ALS)
• Online f/w upgrade

Specifications:

Optical Interface -

Connector - 1x9 (SC) or SFP LC
Data rate - 1000Mbps
Duplex mode - Full duplex
Fibre - MM 50/125μm, 62.5/125μm.
SM 9/125μm
Distance - MM 550m, 2km, SM 15/30/50/80/120km
WDM 20/40/60km
Wavelength - MM 1310nm, SM 1310,1550nm
WDM 1310Tx/1550Rx (type A)
1550Tx/1310Rx (type B)

Electrical Interface -

Connector - RJ45
Data rate - 10Mbps, 100Mbps, 1000Mbps
Duplex mode - Half / Full duplex
Cable - 10Base-T Cat.3, 4, 5, UTP
100Base-TX Cat.5, 5e or higher
1000Base-T Cat.5, 5e or higher

Standard - IEEE 802.3, IEEE 802.3u
Indications - LED Power, FX-Link 1/2, LFP(1000E/ES-2F)
Power, FX-Link , LFP, TX-Link, TX-SPD (1000E/ES-1)
Power Input - Card : 12VDC, Standalone : AC, DC options
Power Consumption - < 4W
Dimension - 155 x 88 x 23mm (D x W x H)
Weight - 120g
Temperature - 0 ~ 50°C (Operating), -10 ~ 70°C (Storage)
Humidity - 10 ~ 90% non-condensing
Certification - CE, FCC, LVD, RoHS
MTBF - 65,000 hrs (25°C)